APEX Reverse Osmosis Membrane - 400 GPD

APEX Reverse Osmosis Membrane – 400 GPD

$119.68

In Stock

Sku: 1132-1

APEX C M400 Membrane is manufactured using the industry’s leading patented membrane film technology and offer reliability, high performance and deliver consistent results. They offer increased production, high rejection rates, and low energy consumption by operating at low applied pressures.

  • Low Pressure
  • High Flow Capacities
  • Improved System Performance
  • Superior Quality and Cost Savings
  • Individually Tested
  • Made in the U.S.A.
Compare

APEX Reverse Osmosis Membrane – 400 GPD

AXEON Ultra Low Pressure HF5 Series Membrane Elements are manufactured using the industrys leading patented membrane film technology
and offer reliability, high performance and deliver consistent results. They offer increased production, high rejection rates and low energy
consumption by operating at low applied pressures.

  • Low Pressure
  • High Flow Capacities
  • Improved System Performance
  • Superior Quality and Cost Savings
  • Individually Tested
  • Made in the U.S.A.

AXEON HF5 Membrane Elements are one of the industries most reliable and highest performing reverse osmosis elements. AXEON membranes
are available in all standard commercial sizes and feature a protective ABS shell. Advanced membrane technology and manufacturing processes
ensure high quality and performance, allowing for improved system performance. All elements are shipped dry for an extended shelf life and
easier handling. Membrane elements are 100% vacuum integrity tested and may also be ordered as individually wet tested.

Operating Limits
Membrane Type Polyamide Thin-Film pH Range, Short Term Cleaning (30 Min.) 1 – 13
Maximum Operating Temperature 113oF (45oC) Maximum Feed Water Turbidity 1 NTU
Maximum Operating Pressure 600 psi (41 bar) Maximum Feed Silt Density Index 5 SDI
Minimum Concentrate Flow Rate 5:1 Chlorine Tolerance 0 ppm
pH Range, Continuous Operation 2 – 11
Product Specification
Part Number Description Applied Pressure psi (bar) Permeate Flow Rate gpd (m3/d) Nominal Salt Rejection (%)
208125 HF5 2514 80 (5.52) 225 (0.85) 98.5
208083 HF5 2521 80 (5.52) 400 (1.51) 98.5
208084 HF5 2540 80 (5.52) 850 (3.22) 98.5
200392 HF5 4014 80 (5.52) 600 (2.27) 98.5
200393 HF5 4021 80 (5.52) 1000 (3.79) 98.5
200394 HF5 4040 80 (5.52) 2500 (9.46) 98.5
  • Test Parameters: 550 TDS Filtered (5 Micron), De-Chlorinated, Softened City Feed Water, 77 Degrees F, 15% Permeate Recovery, 6.5 – 7.0 pH Range, at the Specified Operating Pressure.
    Data Taken After 30 Minutes of Operation. Maximum Pressure drop for each element is 10 psi. Minimum salt rejection is 96%. Permeate flow for individual elements may vary +/- 20%.
Dimensions inch (mm):
Description A B C D
HF5 2514 14 (355.6) 1.1 (27.94) 0.75 (19.05) 2.4 (60.96)
HF5 2521 21 (533.4) 1.1 (27.94) 0.75 (19.05) 2.4 (60.96)
HF5 2540 40 (1016.0) 1.1 (27.94) 0.75 (19.05) 2.4 (60.96)
HF5 4014 14 (355.6) 1.1 (27.94) 0.75 (19.05) 3.95 (100.3)
HF5 4021 21 (533.4) 1.1 (27.94) 0.75 (19.05) 3.95 (100.3)
HF5 4040 40 (1016.0) 1.1 (27.94) 0.75 (19.05) 3.95 (100.3)
  • Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturer
    recommends removing residual free chlorine by pretreatment prior to membrane exposure. Wet tested membrane elements must be kept sealed and moist when in storage. Drying out may occur
    and damage the membrane permanently. Prevent elements from freezing or being exposed to direct sunlight. Wet tested elements are vacuum sealed in a polyethylene bag containing 1.0% sodium
    meta-bisulfite and then packaged in a cardboard box. Discard the permeate for the first twenty-four hours of operation. The permeate flow (product water flow) varies with feed water temperature.
    For membrane warranty information, please contact the manufacturer.
    The manufacturer believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions and methods
    of use of products are beyond the manufacturers control. The manufacturer assumes no liability for results obtained or damages incurred through the application of the presented information and
    data. It is the users responsibility to determine the appropriateness of these products for the users specific end uses

 

Weight 5 lbs

Reviews

There are no reviews yet.

Be the first to review “APEX Reverse Osmosis Membrane – 400 GPD”

Your email address will not be published. Required fields are marked *

Back to Top