AXEON HF4-4040 Reverse Osmosis Membrane
AXEON® HF4 Membrane Elements are one of the industries most reliable and highest performing reverse osmosis elements. AXEON® membranes are available in all standard commercial sizes and feature a protective ABS shell. Advanced membrane technology and manufacturing processes ensure high quality and performance, allowing for improved system performance. All elements are shipped dry for an extended shelf life and easier handling. Membrane elements are 100% vacuum integrity tested and may also be ordered as individually wet tested.
|Membrane Type||Polyamide Thin-Film||pH Range, Short Term Cleaning (30 Min.)||1 - 13|
|Maximum Operating Temperature||113oF (45oC)||Maximum Feed Water Turbidity||1 NTU|
|Maximum Operating Pressure||600 psi (41 bar)||Maximum Feed Silt Density Index||5 SDI|
|Minimum Concentrate Flow Rate||5:1||Chlorine Tolerance||0 ppm|
|pH Range, Continuous Operation||2 - 11|
Dimensions inch (mm):
|HF4 – 2514||14 (355.6)||1.1 (27.94)||0.75 (19.05)||2.4 (60.96)|
|HF4 – 2521||21 (533.4)||1.1 (27.94)||0.75 (19.05)||2.4 (60.96)|
|HF4 – 2540||40 (1016.0)||1.1 (27.94)||0.75 (19.05)||2.4 (60.96)|
|HF4 – 4014||14 (355.6)||1.1 (27.94)||0.75 (19.05)||3.95 (100.3)|
|HF4 – 4021||21 (533.4)||1.1 (27.94)||0.75 (19.05)||3.95 (100.3)|
|HF4 – 4040||40 (1016.0)||1.1 (27.94)||0.75 (19.05)||3.95 (100.3)|
Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturer recommends removing residual free chlorine by pretreatment prior to membrane exposure. Wet tested membrane elements must be kept sealed and moist when in storage. Drying out may occur and damage the membrane permanently. Prevent elements from freezing or being exposed to direct sunlight. Wet tested elements are vacuum sealed in a polyethylene bag containing 1.0% sodium meta-bisulfite and then packaged in a cardboard box. Discard the permeate for the first twenty-four hours of operation. The permeate flow (product water flow) varies with feed water temperature. For membrane warranty information, please contact the manufacturer.
The manufacturer believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions and methods of use of products are beyond the manufacturer’s control. The manufacturer assumes no liability for results obtained or damages incurred through the application of the presented information and data. It is the user’s responsibility to determine the appropriateness of these products for the user’s specific end uses
Enjoy Crisp Clean Refreshing Drinking Water for Your Healthy Lifestyle.
When you choose an APEX water filter, you’ll get the absolute best water filter system for your needs from a company that values your business and will go above and beyond to ensure your full satisfaction.
Built in U.S.A
Not only can you feel good knowing that APEX Water Filters gives Americans good-paying jobs, but you can also be certain that we carefully monitor each step in the manufacturing process because we produce our filtration systems locally.
If for any reason you’re not completely satisfied with an APEX Water Filter, we’ll replace it or refund the purchase price–no questions asked.
At APEX Water Filters, we believe that the best water filters start with the best materials. That’s why we only use carbon that is certified by the National Safety Foundation and components that are approved by the U.S. Food and Drug Administration.
Before a water filtration system leaves our facility, we test it to ensure that it meets our high quality standards. This extra step ensures that you receive a filtration system in the best possible condition.