Discover Purity, Choose Apex Water Filters!

AXEON HF5-4040 Reverse Osmosis Membrane – 2500 GPD

SKU: HF5-4040–2500-GPD
Sale Price $312.21 Listed Price $405.87
In stock

APEX HF5-4040 Membrane is manufactured using the industry’s leading patented membrane film technology and offer reliability, high performance and deliver consistent results. They offer increased production, high rejection rates, and low energy consumption by operating at low applied pressures.

  • Low Pressure
  • High Flow Capacities
  • Improved System Performance
  • Superior Quality and Cost Savings
  • Made in the U.S.A.

APEX Reverse Osmosis Membrane – 2500 GPD

 

AXEON Ultra Low Pressure HF5 Series Membrane Elements are manufactured using the industry’s leading patented membrane film technology
and offer reliability, high performance and deliver consistent results. They offer increased production, high rejection rates and low energy
consumption by operating at low applied pressures.

  • Low Pressure
  • High Flow Capacities
  • Improved System Performance
  • Superior Quality and Cost Savings
  • Individually Tested
  • Made in the U.S.A.

AXEON HF5 Membrane Elements are one of the industries most reliable and highest performing reverse osmosis elements. AXEON membranes
are available in all standard commercial sizes and feature a protective ABS shell. Advanced membrane technology and manufacturing processes
ensure high quality and performance, allowing for improved system performance. All elements are shipped dry for an extended shelf life and
easier handling. Membrane elements are 100% vacuum integrity tested and may also be ordered as individually wet tested.

 

Operating Limits
 
Membrane TypePolyamide Thin-FilmpH Range, Short Term Cleaning (30 Min.)1 – 13
Maximum Operating Temperature113oF (45oC)Maximum Feed Water Turbidity1 NTU
Maximum Operating Pressure600 psi (41 bar)Maximum Feed Silt Density Index5 SDI
Minimum Concentrate Flow Rate5:1Chlorine Tolerance0 ppm
pH Range, Continuous Operation2 – 11  

 

PRODUCT SPECIFICATION
PART NUMBERDESCRIPTIONAPPLIED PRESSURE PSI (BAR)PERMEATE FLOW RATE GPD (M3/D)NOMINAL SALT REJECTION (%)
208125HF5 251480 (5.52)225 (0.85)98.5
208083HF5 252180 (5.52)400 (1.51)98.5
208084HF5 254080 (5.52)850 (3.22)98.5
200392HF5 401480 (5.52)600 (2.27)98.5
200393HF5 402180 (5.52)1000 (3.79)98.5
200394HF5 404080 (5.52)2500 (9.46)98.5
  • Test Parameters: 550 TDS Filtered (5 Micron), De-Chlorinated, Softened City Feed Water, 77 Degrees F, 15% Permeate Recovery, 6.5 – 7.0 pH Range, at the Specified Operating Pressure.
    Data Taken After 30 Minutes of Operation. Maximum Pressure drop for each element is 10 psi. Minimum salt rejection is 96%. Permeate flow for individual elements may vary +/- 20%.
 
DIMENSIONS INCH (MM):
DESCRIPTIONABCD
HF5 251414 (355.6)1.1 (27.94)0.75 (19.05)2.4 (60.96)
HF5 252121 (533.4)1.1 (27.94)0.75 (19.05)2.4 (60.96)
HF5 254040 (1016.0)1.1 (27.94)0.75 (19.05)2.4 (60.96)
HF5 401414 (355.6)1.1 (27.94)0.75 (19.05)3.95 (100.3)
HF5 402121 (533.4)1.1 (27.94)0.75 (19.05)3.95 (100.3)
HF5 404040 (1016.0)1.1 (27.94)0.75 (19.05)3.95 (100.3)
  • Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturer
    recommends removing residual free chlorine by pretreatment prior to membrane exposure. Wet tested membrane elements must be kept sealed and moist when in storage. Drying out may occur
    and damage the membrane permanently. Prevent elements from freezing or being exposed to direct sunlight. Wet tested elements are vacuum sealed in a polyethylene bag containing 1.0% sodium
    meta-bisulfite and then packaged in a cardboard box. Discard the permeate for the first twenty-four hours of operation. The permeate flow (product water flow) varies with feed water temperature.
    For membrane warranty information, please contact the manufacturer.
    The manufacturer believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions and methods
    of use of products are beyond the manufacturers control. The manufacturer assumes no liability for results obtained or damages incurred through the application of the presented information and
    data. It is the users responsibility to determine the appropriateness of these products for the users specific end uses
Write Your Own Review
You're reviewing:AXEON HF5-4040 Reverse Osmosis Membrane – 2500 GPD
Your Rating