APEX Reverse Osmosis Membrane – 2500 GPD
AXEON Ultra Low Pressure HF5 Series Membrane Elements are manufactured using the industry’s leading patented membrane film technology
and offer reliability, high performance and deliver consistent results. They offer increased production, high rejection rates and low energy
consumption by operating at low applied pressures.
- Low Pressure
- High Flow Capacities
- Improved System Performance
- Superior Quality and Cost Savings
- Individually Tested
- Made in the U.S.A.
AXEON HF5 Membrane Elements are one of the industries most reliable and highest performing reverse osmosis elements. AXEON membranes
are available in all standard commercial sizes and feature a protective ABS shell. Advanced membrane technology and manufacturing processes
ensure high quality and performance, allowing for improved system performance. All elements are shipped dry for an extended shelf life and
easier handling. Membrane elements are 100% vacuum integrity tested and may also be ordered as individually wet tested.
| Membrane Type | Polyamide Thin-Film | pH Range, Short Term Cleaning (30 Min.) | 1 – 13 |
|---|---|---|---|
| Maximum Operating Temperature | 113oF (45oC) | Maximum Feed Water Turbidity | 1 NTU |
| Maximum Operating Pressure | 600 psi (41 bar) | Maximum Feed Silt Density Index | 5 SDI |
| Minimum Concentrate Flow Rate | 5:1 | Chlorine Tolerance | 0 ppm |
| pH Range, Continuous Operation | 2 – 11 |
| Product Specification | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Part Number | Description | Applied Pressure psi (bar) | Permeate Flow Rate gpd (m3/d) | Nominal Salt Rejection (%) | |||||
| 208125 | HF5 2514 | 80 (5.52) | 225 (0.85) | 98.5 | |||||
| 208083 | HF5 2521 | 80 (5.52) | 400 (1.51) | 98.5 | |||||
| 208084 | HF5 2540 | 80 (5.52) | 850 (3.22) | 98.5 | |||||
| 200392 | HF5 4014 | 80 (5.52) | 600 (2.27) | 98.5 | |||||
| 200393 | HF5 4021 | 80 (5.52) | 1000 (3.79) | 98.5 | |||||
| 200394 | HF5 4040 | 80 (5.52) | 2500 (9.46) | 98.5 | |||||
- Test Parameters: 550 TDS Filtered (5 Micron), De-Chlorinated, Softened City Feed Water, 77 Degrees F, 15% Permeate Recovery, 6.5 – 7.0 pH Range, at the Specified Operating Pressure.
Data Taken After 30 Minutes of Operation. Maximum Pressure drop for each element is 10 psi. Minimum salt rejection is 96%. Permeate flow for individual elements may vary +/- 20%.
| Dimensions inch (mm): | ||||
|---|---|---|---|---|
| Description | A | B | C | D |
| HF5 2514 | 14 (355.6) | 1.1 (27.94) | 0.75 (19.05) | 2.4 (60.96) |
| HF5 2521 | 21 (533.4) | 1.1 (27.94) | 0.75 (19.05) | 2.4 (60.96) |
| HF5 2540 | 40 (1016.0) | 1.1 (27.94) | 0.75 (19.05) | 2.4 (60.96) |
| HF5 4014 | 14 (355.6) | 1.1 (27.94) | 0.75 (19.05) | 3.95 (100.3) |
| HF5 4021 | 21 (533.4) | 1.1 (27.94) | 0.75 (19.05) | 3.95 (100.3) |
| HF5 4040 | 40 (1016.0) | 1.1 (27.94) | 0.75 (19.05) | 3.95 (100.3) |
- Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, the manufacturer
recommends removing residual free chlorine by pretreatment prior to membrane exposure. Wet tested membrane elements must be kept sealed and moist when in storage. Drying out may occur
and damage the membrane permanently. Prevent elements from freezing or being exposed to direct sunlight. Wet tested elements are vacuum sealed in a polyethylene bag containing 1.0% sodium
meta-bisulfite and then packaged in a cardboard box. Discard the permeate for the first twenty-four hours of operation. The permeate flow (product water flow) varies with feed water temperature.
For membrane warranty information, please contact the manufacturer.
The manufacturer believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as conditions and methods
of use of products are beyond the manufacturers control. The manufacturer assumes no liability for results obtained or damages incurred through the application of the presented information and
data. It is the users responsibility to determine the appropriateness of these products for the users specific end uses
Reviews
There are no reviews yet.